EasyManua.ls Logo

Alcatel-Lucent 7750 - Page 23

Alcatel-Lucent 7750
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RADIUS Attributes Reference
7750 SR RADIUS Attributes Reference Guide Page 23
101 Error-Cause The Error-Cause Attribute provides more detail on the cause of the problem if
the NAS cannot honor Disconnect-Request or CoA-Request messages for some
reason. It may be included within Disconnect-ACK, Disconnect-NAK and
CoA-NAK messages. The Error-Causes are divided in 5 blocks. Range [400-
499] is used for fatal errors committed by the RADIUS server. Range [500-599]
is used for fatal errors occurring on a NAS or RADIUS proxy. Ranges [000-199
reserved], [300-399 reserved] and [200-299 used for successful completion in
disconnect-ack/coa-ack] are not implemented.
123 Delegated-IPv6-
Prefix
Attribute that carries the Prefix (ipv6-prefix/prefix-length) to be delegated via
DHCPv6 (IA-PD) for the LAN side of the user (IPoE, PPPoE). Maps to
DHCPv6 option IA-PD [25] sub-option IA-Prefix [26] Prefix. An exact
Delegated-prefix-Length [DPL] match with configure service <service-id>
subscriber-interface <ip-int-name> ipv6 delegated-prefix-length [48..64] is
required with the received attribute prefix-length unless a variable DPL is
configured (configure service <service-id> subscriber-interface <ip-int-
name> ipv6 delegated-prefix-length variable). In the latter case multiple hosts
for the same group-interface having different prefix-length [48..64] per host are
supported. Simultaneous returned attributes [123] Delegated-IPv6-Prefix and
[26-6527-131] Alc-Delegated-IPv6-Pool are handled as host setup failures.
Attribute is also used in CoA and Disconnect Message (part of the ESM or AA
user identification-key). Attribute is omitted in accounting via configure
subscriber-mgmt radius-accounting-policy <name> include-radius-
attribute no delegated-ipv6-prefix.
26-2352-1 Client-DNS-Pri The IPv4 address of the primary DNS server for this subscribers connection and
maps to PPPoE IPCP option 129 Primary DNS Server address or DHCPv4
option 6 Domain Server. Is an alternative for 26-4874-4 ERX-Primary-Dns or
26-6527-9 Alc-Primary-Dns.
26-2352-2 Client-DNS-Sec
A IPv4 address of the secondary DNS server for this subscribers connection and
maps to 'PPPoE IPCP option 131 Secondary DNS Server address or DHCPv4
option 6 Domain Server. Is an alternative for 26-4874-5 ERX-Secondary-Dns
or 26-6527-10 Alc-Secondary-Dns.
26-2352-36 Ip-Address-Pool-
Name
The name of an assigned address pool that should be used to assign an address
for the user and maps to dhcpv4 option[82] vendor-specific-option [9] sub-
option [13] dhcpPool if option is enabled on the node (configure service
<service-id> subscriber-interface <ip-int-name> group-interface <ip-int-
name> dhcp option vendor-specific-option pool-name). Alternative to [88]
Pool-Name and [26-4874-2] ERX-Address-Pool-Name. Framed-Pool names
longer than the allowed maximum are treated as host setup failures.
Simultaneous returned attributes Pool-Names [8] and Framed-IP-Address are
also handled as host setup failures.
Table 2: Subscriber Host Identification (description) (Continued)
Attribute ID Attribute Name Description

Table of Contents

Other manuals for Alcatel-Lucent 7750

Related product manuals