Subscriber Host Identification
Page 30 7750 SR RADIUS Attributes Reference Guide
26-6527-35 Alc-PPPoE-
Service-Name
Maps to PADI field PPPoE tags [0x0101] service-name and is sent in the
Access-Request if enabled under configure subscriber-mgmt authentication-
policy <name> include-radius-attribute pppoe-service-name. A PPPoE-
Service-Name above the allowed maximum length is handled as a PPPOE
session setup failure.
26-6527-36 Alc-DHCP-
Ve n dor- Clas s-Id
Initiated by DHCP clients via option 60 [Class-id] and reflected in
Authentication. (configure subscriber-mgmt authentication-policy <name>
include-radius-attribute dhcp-vendor-class-id or configure aaa isa-radius-
policy <name> auth-include-attributes dhcp-vendor-class-id). DHCP option
[60] Class-ID can also be used as User-name in RADIUS requests. (configure
subscriber-mgmt authentication-policy <name> user-name-format dhcp-
client-vendor-opts).
2 6 - 6 5 2 7 - 4 5 A l c - A p p - P r o f - S t r A p p l i c a t i o n Assurance for residential, business or transit-AA subscribers is
enabled through the assignment of an application profile as part of either
enhanced subscriber management or static configuration. [26-6527-45] Alc-
App-Prof-is is a string that maps (configure subscriber-mgmt sub-ident-
policy <sub-ident-policy-name> app-profile-map) to such an application
profile (configure application-assurance group <aa-group-id:partition-id>
policy app-profile <app-profile-name>). This attribute is used in access-accept
(to assign an application profile during esm host creation) and CoA (to change
the application profile of a AA-subscriber or to create transit AA-subscriber).
Strings longer than the allowed maximum are treated as setup failures.
Unreferenced strings (strings not mapping to an application profile) will silently
trigger a fallback to pre-configured default values if allowed. If no default value
is pre-configured, the subscriber's application profile is silently disabled for esm
AA-subscriber; in case of a transit AA-subscriber creation the CoA will be
rejected. The change of an application profile to one configured under a
different group/partition or the modification of the application profile of a static
AA-subscriber is not allowed and will be treated as setup failures.
26-6527-99 Alc-Ipv6-Address The ipv6 address to be configured to the WAN side of the user (IPoE,PPPoE)
via DHCPv6 (IA-NA). Maps to DHCPv6 option IA-NA[3] sub-option IA-
Address[5] address. This attribute is an alternative to [97] Framed-IPv6-Prefix
and [100] Framed-IPv6-Pool, which also assigns IPv6 addressing to the wan-
side of a host via SLAAC or DHCPv6 IA-NA. Attribute is also used in CoA and
Disconnect Message (part of the ESM or AA user identification-key). Attribute
is omitted in accounting via configure subscriber-mgmt radius-accounting-
policy <name> include-radius-attribute no ipv6-address.
For data-triggered authentication of an IPv6 UE in Distributed Subscriber
Management (DSM) context, this attribute contains the IPv6 address that
triggered the request. Inclusion of this attribute is configured under configure
aaa isa-radius-policy <policy-name> auth-include-attributes ipv6-address.
Table 2: Subscriber Host Identification (description) (Continued)
Attribute ID Attribute Name Description
To Next Page
