Wholesale-Retail — L2TP Tunneled Access Mode
Page 66 7750 SR RADIUS Attributes Reference Guide
26-6527-215 Alc-Tunnel-Recovery-Time Only applicable when the L2TP LAC failover recovery-method is set
to recovery-tunnel. Sets the L2TP LAC failover recovery-time to be
negotiated with LNS via L2TP failover extensions (RFC 4951). It
indicates to the LNS how long it needs to extend its protocol retry
timeout before declaring the control channel down. Pre-configured
values are used when attribute is omitted (configure router/service
vprn <service-id> l2tp failover recovery-time).
Values outside the limits are treated as a setup failure.
Table 8: Wholesale-Retail: L2TP Tunneled Access Mode (description) (Continued)
Attribute ID Attribute Name Description
To Next Page
Loading...
