Alcatel-Lucent 8001 - Voip Call Forward

Alcatel-Lucent 8001 DeskPhone
ALE International proprietary and confidential. Copyright © 2016. All rights reserved.
Page 34 of 49
Conference Exit Result
Choose what should happen when the Conference originator hangs
up: either keep the communication between the two other parties,
or hang up the whole conference.
Return Code When
Refuse
Select the code to feedback to the server when you reject the call.
Return Code When
DND
Select the code to feedback to the server when you a call is rejected
because of your DND function enabled.
Flash Hook Time (< 800
ms)
The time for the flash hook.
Called No Answer Time
When you receive an incoming call while this feature is enabled,
and if you don't answer the call, the caller will receive a time out
after the here-defined "Called No Answer Time" has elapsed.
Pound Send Method
Following RFC2396, the "#" will be interpreted as '#' or as %23 in
the SIP request method, depending on what you define here.
RFC 2833 Play Load
Default is 101, RTP Payload for DTMF Digits, Telephony Tones and
Telephony Signals
P-Asserted-Identity
Enable/Disable the P-Asserted-Identity feature.
SIP Session Timer T1
The SIP Session Timer T1 settings.
SIP Session Timer T2
The SIP Session Timer T2 settings.
SIP Session Timer T4
The SIP Session Timer T4 settings.
Local SIP Port
The port range settings for SIP, default is 5060.
RTP Port Range
The port range for RTP
Affiliated Port
Enable/Disable the affiliated port feature.
Headset Mode
Select headset mode as normal or seat.
Ring Type On Seat
Mode
Select ring type mode with headset or speaker.
6.1.3 VoIP Call Forward
ITEM DECSRIPTION
Always
Always transfer the incoming calls (enter the destination number).
If Busy
If the phone is busy, the call will be transferred (enter the destination
number).
If No Answer
If the call is not answered, the call will be transferred (enter the
destination number).