Alcatel-Lucent 8001 User Manual

Alcatel-Lucent 8001 DeskPhone
ALE International proprietary and confidential. Copyright © 2016. All rights reserved.
Page 37 of 49
Other
Payload Length
The payload length setting, default is 30ms.
High Rate Of G723.1
Enable/Disable High Rate of G723.1 feature.
VAD
Enable/Disable VAD feature.
Echo Suppression
Mode
Enable/Disable Echo Suppression Mode feature.
Side Tone
Enable/Disable Side Tone feature.
6.3 Line Keys
ITEMS
DESCRIBES
Line
Line is the default value.
Speed Dial
You can use this key feature to speed up dialing the numbers that are
often used or hard to remember.
Speed Dial Prefix
You can use this key feature to speed up dialing a specific prefix number.
DTMF
You can use this key feature to send arbitrary key sequences via DTMF.
BLF
You can use the BLF (Busy Line Field) feature to monitor a specific user for
status changes on the phone.
Paging
You can use multicast paging to forward time sensitive announcements
out to people within the multicast group.
Call Park
You can use call park feature to place a call on hold, and then retrieve the
call from another phone in the system (for example, a phone in another
office or conference room).
Intercom
You can press the configured intercom key to automatically connect with a
remote extension for outgoing intercom calls, and the remote extension
will automatically answer the incoming intercom calls
BLA
Bridge Line Appearance (BLA), also named Shared Line Appearance (SLA)
With this BLA configuration, the 8001 DeskPhone set monitors a shared
line status.

Alcatel-Lucent 8001 Specifications

General

Brand	Alcatel-Lucent
Model	8001
Category	IP Phone
Language	English