Mounting OS6250 Switches Assembling OS6250 Switches
OmniSwitch 6250 Series Hardware Users Guide September 2009 page 3-7
Preliminary
9/28/09
3 Attach the power supply tray extension bracket to the rear of the power supply tray using one screw
(M3 pan head) and then attach the slide bracket to the extension with two screws (M3 pan head).
Power Supply Tray Extension Bracket
4 Slide the power supply tray and chassis together.
Power Supply Tray Extension Bracket with Slide Bracket
Attach power supply tray extension bracket to
the rear of the chassis.
Attach slide-bracket to power supply tray
extension.
To Next Page
Loading...
