SNMP Trap Information SNMP Traps Table
OmniSwitch 6250/6450 Switch Management Guide May 2012 page B-3
4 authenticationFailure none snmp The SNMP agent in the switch
has received a protocol message
that is not properly authenticated.
5 entConfigChange none module An entConfigChange notification
is generated when a conceptual
row is created, modified, or
deleted in one of the entity
tables.
6 aipAMAPStatusTrap aipAMAPLast-
TrapReason
aipAMAPLast-
TrapPort
aip The status of the Alcatel-Lucent
Mapping Adjacency Protocol
(AMAP) port changed.
aipAMAPLastTrapReason—Reason for last change of port status. Valid reasons are 1 (port added), 2 (change
of information on existing port), 3 (port deleted), and 4 (no trap has been sent).
aipAMAPLastTrapPort—The ifindex number of the port that most recently changed.
7 aipGMAPConflictTrap aipGMAPLast-
TrapReason
aipGMAPLast-
TrapPort
aipGMAPLast-
TrapMac
aipGMAPLast-
TrapProtocol
aipGMAPLast-
TrapVlan
aip Indicates a Group Mobility
Advertisement Protocol (GMAP)
port update conflict.
aipGMAPLastTrapReason—Reason for last GMAP update to not be applied. Valid reasons are 1 (Target
VLAN is an authenticated VLAN), 2 (update would conflict with a binding rule), 3 (update would create two
different VLAN entries for the same protocol), 4 (update would create two different protocol entries for the
same VLAN), 5 (target VLAN is not mobile), and 6 (no trap has been sent).
aipGMAPLastTrapPort—The ifindex number of the last port on which the GMAP was not applied because of
a conflict.
aipGMAPLastTrapMac—The last MAC address for which a GMAP change was not
applied because of a conflict.
aipGMAPLastTrapProtocol—The protocol identifier of the last GMAP change that was not applied because
of a conflict.
aipGMAPLastTrapVlan—The VLAN identifier of the last GMAP change that was not applied because of a
conflict.
Note: This trap (GMAP) is not supported.
8 policyEventNotification policyTrapE-
ventDetail-
String
policyTrapE-
ventCode
qos The switch notifies the NMS
when a significant event happens
that involves the policy manager.
policyTrapEventDetailString—Details about the event that took place.
policyTrapEventCode—The code of the event.
No. Trap Name Objects Family Description
To Next Page
Loading...
