OmniSwitch 6250/6450 Switch Management Guide May 2012 Index-1
Index
Symbols
!! command 6-10
A
aaa authentication command 10-7, 10-8, 10-10, 11-5
aaa radius-server command 10-7
accounting
for Authenticated Switch Access 10-12
ACE/Servers 10-4
application examples
applying configuration files 7-4
Authenticated Switch Access 10-7
CLI 6-7, 6-23
CMM 5-5
configuration file 7-2
customer login user accounts 9-7
Emergency Restore 5-32
file management 1-29
logging into the switch 2-5
network administrator user accounts 9-6
NTP 4-3
Prefix Recognition 6-12
SNMP 3-4
Trap Filters 3-5
WebView 11-5
applying configuration files
application examples 7-4
ASA
see Authenticated Switch Access
ASA Configuration
verify information about 10-13
Authenticated Switch Access 10-4
accounting 10-12
application examples 10-7
management interfaces 10-9
authentication
MD5 3-11
SHA 3-11
traps 3-14
Automatic Remote Configuration 8-5
Bootup Configuration File 8-12
Debug Configuration File 8-12
Firmware upgrade Files 8-12
Instruction File 8-12
Script File 8-12
Troubleshooting 8-23
Automatic Remote Configuration network components 8-6
TFTP File Server 8-6
B
banner
login 2-21
pre-login text 2-22
boot.cfg file 5-3, 5-16
Emergency Restore 5-34, 5-35
C
cd command 1-9
certified directory 5-3
copying to working directory 5-22, 5-27
Chassis Management Module
see CMM
chmod command 1-16
CLI 6-1
application examples 6-7, 6-23
domains and families 9-17
logging commands 6-15–6-16
specifications 6-2
CLI usage
verify information about 6-24
CMM 5-1
application examples 5-5
boot.cfg file 5-3
cancelling a reboot 5-14, 5-20, 5-25
certified directory 5-3
checking reboot status 5-15
configuration files 5-3
copying
certified directory to working directory 5-22, 5-27
running configuration to working directory 5-16
working directory to certified directory 5-21, 5-26
displaying current configuration 5-23, 5-30
displaying switch files 5-24
image files 5-3
managing 5-13
rebooting 5-13, 5-25
rebooting from the working directory 5-18, 5-26
running configuration 5-3, 5-4
scheduling a reboot 5-14, 5-25
specifications 5-2
swapping primary for secondary 5-29
synchronizing primary and secondary 5-26, 5-27
working directory 5-3
CMM Conditions
verify information about 5-36
CMM scenarios 5-5
lost running configuration 5-5
rollback to previous software 5-8
running configuration saved to working directory 5-6
working directory saved to certified directory 5-7
Command Line Interface
see CLI
community strings 3-10
configuration apply command 7-2, 7-4
for a specific timeperiod 7-5
configuration cancel command 7-7
configuration error-file limit command 7-8
To Next Page
Loading...
