In This Chapter Managing OmniSwitch 6250 Stacks
page 7-2 OmniSwitch 6250 Hardware Users Guide September 2015
In This Chapter
This chapter provides information on OmniSwitch 6250 switches configured to operate as a single virtual
chassis. Topics described in the chapter include:
• OmniSwitch 6250 stack overview on page 7-4.
• Roles within the stack on page 7-4.
• Stack cabling on page 7-17.
• Slot numbering on page 7-20.
• Hot-Swapping modules in a stack on page 7-25.
• Reloading switches on page 7-27.
• Changing the secondary module to primary on page 7-35.
• Synchronizing switches in a stack on page 7-37.
• Stack Split Detection on page 7-38.
• Monitoring the stack on page 7-41.
Note. You can also manage and monitor OmniSwitch 6250 stacks through WebView,
Alcatel-Lucent’s embedded web-based device management application. WebView is an interactive and
easy-to-use GUI that can be launched from OmniVista or a web browser. Please refer to WebView’s
online documentation for more information.
To Next Page
Loading...
