Connecting Chassis to Power Source Mounting OS6250 Switches
page 4-28 OmniSwitch 6250 Hardware Users Guide September 2015
Securing the Redundant DC Power Supply Connector
If a redundant DC power supply is to be used, follow the steps below to securely mount the redundant DC
power connector to the power supply tray.
1 Secure the DC power connector bracket to the power supply tray using the screws provided.
Secure DC Power Connector Bracket
2 Slide the female DC power connector into the bracket and secure to the bracket with the screws
provided.
3 Connect the male DC connector to the female connector and secure to the female DC connector with
the captive screws contained in the male DC connector.
Secure DC Power Connector Bracket
DC Power Connector Bracket
Male DC Connector
Secure female connector to
bracket with screws
Female DC Connector
To Next Page
Loading...
