Alcatel-Lucent OmniSwitch 6250 - Viewing PoE Power Supply Status

Viewing PoE Power Supply Status Managing Power over Ethernet (PoE)
page 6-4 OmniSwitch 6250 Hardware Users Guide September 2015
Viewing PoE Power Supply Status
To view the current status of power supplies installed, use the show power command, as shown below:
-> show power
Slot PS Wattage Type Status Location
----+----+---------+------+-----------+----------
1 1 225 AC UP External
1 2 225 AC UP External
2 1 225 AC UP External
2 2 225 AC UP External
For detailed information on the show power command output, refer to the CLI Command Reference
Guide.