Alcatel-Lucent OmniSwitch 6250 - OS6250-REAR-MNT - Mounting Instructions; Steps

Mounting OS6250 Switches Mounting OS6250 Switches
OmniSwitch 6250 Hardware Users Guide September 2015 page 4-19
OS6250-REAR-MNT - Mounting Instructions
Alcatel-Lucent provides an optional rack mounting kit that allows OmniSwitches to be secured to both the
front and back rails of the rack for additional stability.
Parts Provided
Steps
Tray Inserts (2) Extension Brackets Flanged Inserts Attachment Screws
(30) M3
(6) M2.6
Slot/Slide Brackets
2
(4) M3
(3) M3
Detail
1. Attach the tray inserts to the power supply trays
using the attachment screws, as shown.
2. Attach an extension bracket to both sides of the
chassis assembly. The guide rails should face out and
the word “TOP” should face up. Be sure to use three
screws at front and four at the rear of rails.
(2) M3
(3) M2.6
(2) M3
1
4. Slide the bracket inserts into the extension bracket
guide rails until the flanges meet the rack. Be sure that
the rack mount flanges are facing out and secure.
3. Attach the slide bracket to the rear of one power tray
and the slot bracket to the rear of the other power sup-
ply tray and slide chassis together.
3
4