SNMP Overview Using SNMP
page 3-28 OmniSwitch AOS Release 6 Switch Management Guide July 2010
77 vRtrIsisIDLenMismatch vRtrIsis-
FieldLen
vRtrIsisIfIndex
vRtrIsisPDUF-
ragment
isis This trap is sent when when a
PDU with a different System ID
Length is received. The notifica-
tion includes the index to identify
the circuit for the PDU and the
header of the PDU, which may
help a network manager identify
the source of the problem.
vRtrIsisFieldLen—The System ID Field length.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisPDUFragment—The first 64 bytes of a PDU that triggered the trap.
78 vRtrIsisMaxAreaAddrsMismatch vRtrIsisMax-
AreaAddress,
vRtrIsisIfIndex
vRtrIsisPDUF-
ragment
isis This trap is sent when a PDU
with a different Maximum Area
Addresses value is recieved. The
notification includes the header
of the packet, which may help a
network manager identify the
source of the problem.
vRtrIsisMaxAreaAddress—The maximum number of area addresses in the PDU.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisPDUFragment—The first 64 bytes of a PDU that triggered the trap.
79 vRtrIsisOwnLSPPurge vRtrIsisIfIndex,
vRtrIsisTrapL-
SPID
vRtrIsisSystem-
Level
isis This trap is sent when sent when
a PDU is received with the sys-
tem ID and zero age. This notifi-
cation includes the circuit Index
if available, which may help a
network manager identify the
source of theproblem.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
80 vRtrIsisSequenceNumberSkip vRtrIsisTrapL-
SPID
vRtrIsisIfIndex
vRtrIsisSystem-
Level
isis If an LSP without System ID and
different contents is received, the
LSP may be reissued with a
higher sequence number.
If two Intermediate Systems are
configured with the same System
ID, the sequence number is
increased and this notification is
sent.
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
No. Trap Name Objects Family Description
To Next Page
Loading...
