SNMP Overview Using SNMP
page 3-30 OmniSwitch AOS Release 6 Switch Management Guide July 2010
vRtrIsisLSPSize—The size of the LSP received.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisPDUFragment—Contains up to the first 64 bytes of a PDU that triggered the trap.
85 vRtrIsisRejectedAdjacency vRtrIsisSys-
temLevel
vRtrIsisIfIndex
isis This trap is sent when a Hello
PDU is received from an IS, but
an adjacency is not established
due to a lack of resources.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
86 vRtrIsisLSPTooLargeToPropagate vRtrIsisLSP-
Size
vRtrIsisSystem-
Level
vRtrIsisTrapL-
SPID
vRtrIsisIfIndex
isis This trap is sent when an LSP is
larger than the Data Link Block
Size for a circuit.
vRtrIsisLSPSize—The size of the LSP received.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
vRtrIsisIfIndex—The ISIS interface on which the LSP was received.
87 vRtrIsisOrigLSPBufSizeMismatch vRtrIsisOrigi-
natingBuffer-
Size
vRtrIsisSystem-
Level
vRtrIsisTrapL-
SPID
vRtrIsisIfIndex
isis This trap is sent when a Level 1
or 2 LSP is received that is larger
than the local value for the origi-
nating LSP Buffer Size; or
when a Level 1 or 2 LSP is
received containing the originat-
ing LSP Buffer Size option but
the value in the PDU option field
does not match the local value
for the originating LSP Buffer
Size.
vRtrIsisOriginatingBufferSize—The buffer size advertised by the peer.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a sep-
arate copy of the basic link-state routing algorithm.
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
vRtrIsisIfIndex—The ISIS interface on which the LSP was received.
No. Trap Name Objects Family Description
To Next Page
Loading...
