SNMP Overview Using SNMP
page 3-36 OmniSwitch AOS Release 6 Switch Management Guide July 2010
108 healthMonCpuShutPortTrap healthModule-
Slot
ifIndex
healthMod-
uleCpuLatest
health This trap is sent when port is shut
down because of a CPU spike.
healthModuleSlot—The slot on which anomaly is detected.
ifIndex—The port on which anomaly is detected.
healthModuleCpuLatest—The average module-level CPU utilization over the latest sample period (percent).
109 arpMaxLimitReached none ip This trap is sent when the hard-
ware table has reached the
maximum number of entries sup-
ported. The OS6400 will not
generate new ARP request for
new nexthops.
110 ndpMaxLimitReached none ipv6 This trap is sent when the hard-
ware table has reached the
maximum number of entries sup-
ported. The OS6400 will not
generate new ARP request for
new nexthops.
111 ripRouteMaxLimitReached none rip This trap is sent when the RIP
database reaches the supported
maximum number of entries.
When the maximum number is
reached, RIP discards any new
updates.
112 ripngRouteMaxLimitReached none ripng This trap is sent when the RIPng
database reaches the supported
maximum number of entries.
When the maximum number is
reached, RIPng discards any new
updates.
113 aaaHicServerTrap aaaHSvrIpAd-
dress
aaa This trap is sent when the HIC
server is down.
aaaHSvrIpAddress—The HIC/Rem/WebDL server's IP address.
114 alaErpRingStateChanged alaErpRingId
alaErpRingState
erp This trap is sent when the ERP
Ring State has changed from
“Idle” to “Protection”.
alaErpRingId—The unique Ring identifier.
alaErpRingState—The current state of the Ring (0=Idle, 1=Protection).
115 alaErpRingMultipleRpl alaErpRingId erp This trap is sent when multiple
RPLs are detected in the Ring.
alaErpRingId—The unique Ring identifier.
116 alaErpRingRemoved alaErpRingId erp This trap is sent when the Ring is
removed dynamically.
alaErpRingId—The unique Ring identifier.
No. Trap Name Objects Family Description
To Next Page
Loading...
