EasyManua.ls Logo

Alcatel-Lucent OmniSwitch AOS Release 6 - Page 127

Alcatel-Lucent OmniSwitch AOS Release 6
346 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using SNMP SNMP Overview
OmniSwitch AOS Release 6 Switch Management Guide July 2010 page 3-41
126 vRtrLdpGroupIdMismatch vRtrLdpNotify-
Local-
GroupID
vRtrLdpNoti-
fyRemote-
GroupID
ldp This trap is sent when there is a
mismatch of local and remote
group IDs.
vRtrLdpNotifyLocalGroupID—The local Group ID.
vRtrLdpNotifyRemoteGroupID—The remote Group ID.
127 mplsXCup mplsXCIndex
mplsInSegmen-
tIfIndex
mplsInSeg-
mentLabel
mplsOutSeg-
mentIndex
mplsXCAdmin-
Status
mplsXCOper-
Status
mpls-lsr This trap is generated when one
of the configured cross-connect
entries is about to leave the down
state and transition into some
other state (but not into the “Not
Present” state).
mplsXCIndex—The MPLS Index.
mplsInSegmentIfIndex—The interface index for the incoming MPLS interface.
mplsInSegmentLabel—The incoming label for the segment.
mplsOutSegmentIndex—The outgoing label for the segment.
mplsXCAdminStatus—The desired operational status of the segment (Up/Down/Testing).
mplsXCOperStatus—The actual operational status of the segment (up(1), down(2), testing(3), unknown(4),
dormant(5), notPresent(6), lowerLayerDown(7).
128 mplsXCdown mplsXCIndex,
mplsInSegmen-
tIfIndex
mplsInSeg-
mentLabel
mplsOutSeg-
mentIndex
mplsXCAdmin-
Status
mplsXCOper-
Status
mpls-lsr This trap is sent when one of the
configured cross-connect entries
is about to enter the down state
from some other state (but not
from the “Not Present” state).
mplsXCIndex—The MPLS Index.
mplsInSegmentIfIndex—The interface index for the incoming MPLS interface.
mplsInSegmentLabel—The incoming label for the segment.
mplsOutSegmentIndex—The outgoing label for the segment.
mplsXCAdminStatus—The desired operational status of the segment (Up/Down/Testing).
mplsXCOperStatus—The actual operational status of the segment (up(1), down(2), testing(3), unknown(4),
dormant(5), notPresent(6), lowerLayerDown(7).
129 vRtrMplsStateChange vRtrID,
vRtrMplsGen-
eralAdmin-
State
vRtrMplsGen-
eralOperState
mpls This trap is sent when the MPLS
module changes state.
No. Trap Name Objects Family Description

Table of Contents

Related product manuals