Alcatel-Lucent OmniSwitch AOS Release 6

To Next Page

To Previous Page

Creating Snapshot Configuration Files Working With Configuration Files

page 7-12 OmniSwitch AOS Release 6 Switch Management Guide July 2010

Example Snapshot File Text

The following is the text of a sample snapshot file created with the configuration snapshot all command.

!========================================!

! File: asc.1.snap !

!========================================!

! Chassis :

system name FujiCmm

mac alloc 91 0 1 00:d0:95:6b:09:41

! Configuration:

! VLAN :

! VLAN SL:

! IP :

ip service all

icmp unreachable net-unreachable disable

ip interface "vlan-1" address 10.255.211.70 mask 255.255.255.192 vlan 1 mtu 1500

ifindex 1

! IPX :

! IPMS :

! AAA :

aaa authentication default "local"

aaa authentication console "local"

! PARTM :

! AVLAN :

! 802.1x :

! QOS :

! Policy manager :

! Session manager :

! SNMP :

snmp security no security

snmp community map mode off

! IP route manager :

ip static-route 0.0.0.0 mask 0.0.0.0 gateway 10.255.211.65 metric 1

! RIP :

! OSPF :

! BGP :

! IP multicast :

! IPv6 :

! RIPng :

! Health monitor :

! Interface :

! Link Aggregate :

! VLAN AGG:

! 802.1Q :

! Spanning tree :

bridge mode 1x1

! Bridging :

source-learning chassis hardware

! Bridging :

! Port mirroring :

! UDP Relay :

! Server load balance :

! System service :

! VRRP :

! Web :

! AMAP :

! GMAP :

! Module :

Main Page

Alcatel-Lucent OmniSwitch AOS Release 6 - Page 236

Table of Contents

Related product manuals