OmniSwitch 6450 Feature Overview OmniSwitch 6450 Switches
page 1-4 OmniSwitch 6450 Hardware Users Guide September 2015
OmniSwitch 6450 Feature Overview
Power over HD Base-T (PoH) Support
OmniSwitch 6450-P10S models offer PoE (four pair) ports 1-4 that are compliant with the PoE portion of
the Power over HD Base-T (PoH) standard, up to ~75W per port, with a 280W PoE power budget. These
ports are labeled “HPoE” on the chassis front panel.
Note. PoH is supported on OmniSwitch 6450-P10S models only. PoE support of up to 30W per port is
provided on PoE ports 5 through 8. The maximum PoE power budget available for all ports on the
OmniSwitch 6450-P10S is 280W. Refer to Chapter 3, “OmniSwitch 6450 Chassis and Hardware
Components” for more information.
IEEE 1588 Precision Time Protocol (PTP) Support
OmniSwitch 6450-P10S and OmniSwitch 6450-U24S models provide support for IEEE 1588 Version 2
end-to-end transparent clocking.
IEEE 1588 Precision Time Protocol (PTP) is used to synchronize clocks throughout a network. On a local
area network, it achieves clock accuracy in the sub-microsecond range, making it suitable for
measurement and control systems.
Note. PTP is supported on OmniSwitch 6450-P10S and OmniSwitch 6450-U24S models only. When PTP
mode is enabled, OmniSwitch 6450-U24S switches act as a standalone devices and cannot become part of
a stack. Refer to Chapter 3, “OmniSwitch 6450 Chassis and Hardware Components” for more information.
Security Features
OmniSwitch 6450 switches offer extensive security features for network access control, policy
enforcement and attack containment, enabling fully secure networks and OmniVista Network
Management System (NMS) support.
To Next Page
Loading...
