Mounting OmniSwitch 6450 Switches Installing Available Rack Mounting Kits
OmniSwitch 6450 Hardware Users Guide September 2015 page 4-7
Installing the OS6450-DUAL-MNT Rack Mount Kit
Two chassis can be assembled side-by-side for mounting into a standard 19-inch rack as show in the
figure below.
Fully Assembled Side-by-Side Chassis Assembly
1 Attach the slot-brackets and slide-brackets to the front and back of the chassis using the attachment
screws (M3 flat head) provided for each bracket.
Attach Slot/Slide-Brackets
Slot -bracket
Plate and Screws
Power Supply Tray Rear Bracket
(Not used)
Front center mounting brackets.
Rear center brackets.
To Next Page
Loading...
