Installing Available Rack Mounting Kits Mounting OmniSwitch 6450 Switches
page 4-8 OmniSwitch 6450 Hardware Users Guide September 2015
2 Align the chassis and slide both front and rear center brackets together.
Slide Chassis Together
3 Place bracket plate over front and rear brackets and secure with thumb screws.
Secure Front and Back with Bracket Plate
4 Attach rack mount brackets to both sides of the front of the chassis.
Attach Rack Mount Brackets
5 Using one additional person, lift and position the assembly on the rack until the rack-mount flanges are
flush with the rack post.
To Next Page
Loading...
