• Omniswitch:
• Enabling/disabling DHCP server (enabled by default)
• Configuration of one single DHCP IP address range (default values: 192.168.92.5 to
192.168.92.9)
• Default Numbering Plan
• Installation number
• Operating mode
• Channels and Bundles
• DECT ARI
• Creation of DECT handsets
• Metering
• Date and time
• Terminal List
• Various Subscribers
• Collective speed dial
• OS groups
• Call groups
• Broadcast groups
• Intercept groups
• Screening
6.2.5.2.2 Initial Hotel Installation Wizard
As well as the Business configuration, this wizard can be used to configure terminal numbers in the
hotel rooms.
6.2.5.2.3 Installation Wizard
This wizard enables you to use a .crp type file created under Data and tool repository -> Information
Repository Wizard.
Follow the instructions; if the data is accepted it is transmitted to the system which is then reset.
6.2.5.3 Mode 3: Typical modification
The 5 icons available in this mode (Terminals, Groups, System, Collective Directory and External
Lines) are used to gain access to the wizards used to modify or configure simply various parameters as
detailed below.
The data will be taken into account by the system after clicking OK.
6.2.5.3.1 Subscribers
• List of subscribers: public number, name, discrimination level, accessible network line groups.
• Dividing calls between normal mode and restricted mode.
• EasyPlus View: detailed parameters for each subscriber: keys, languages, authorized usage,
personal code, callbacks, dynamic forwarding, personal directory, etc.
6.2.5.3.2 Groups
• OS Groups
• Making groups: introducing members into each group
• Assigning a welcome message to each group
• Call Groups
• Name and type (parallel, cyclical or sequential)
• Making groups: introducing members into each group
Chapter
6
Start-Up
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 192/207
To Next Page
Loading...
Need help?
General
