Set the option to "off" (no dial by name)
2. With the phone idle, dial *3*3*3"
This reboots the set to factory settings
4.4.2 8082 My IC Phone
4.4.2.1 Commissioning
4.4.2.1.1 Overview
This module presents all the actions required for commissioning the 8082 My IC Phone sets.
Quick
Access Pad
Loudspeaker
Contextual Sensitive
Touch Screen
Bluetooth
Handset
Microphones
Figure 4.3: 8082 My IC Phone set layout
The following figure illustrates the connectors on the base of each set.
Chapter
4
Installation and Cabling
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 76/207
To Next Page
Loading...
