• Subnet mask
• Option 66: IP address:10443 or name of the OXO Connect:10443, for example
192.168.12.34:10443
• Suboption 67 of option 43: the value of this sub-option corresponds to the DM Url.It must contain a
string value set to /dmcfg/
• Option 58: VLAN ID: this is sent as a suboption of option 43
Optionally, the DHCP offer can include the following parameters, which can also be configured locally
on the terminal or on the OXO Connect:
• Option 6: Domain Name Server (DNS primary and secondary)
• Option 15: Domain name
• Option 12: Host name (eg, ICTouch<MAC>)
• Option 42: SNTP server
• Option 120: SIP server (outbound proxy server address or name)
Configuring network parameters for static initialization
MMI allows to access and configure the following parameters (you must have administration rights to
modify static configuration):
• In the Network menu:
• DM (OXO Connect) URL: https://OXO Connect IP address:10443/dmcfg/
• DNS addresses
• Ethernet parameters: the LAN and PC Ethernet interfaces are by default configured in auto-
negotiation mode
• IP parameters
• Log parameters, allowing to define a syslog server for log reception
• Network parameters, allowing to:
• Enable and configure a DHCP User Class: this makes the set send the standard DHCP
option 77 (User Class, RFC2132) within the DISCOVER and REQUEST DHCP messages.
Using this option allows to define groups of terminals, and to attach these groups to different
and independent Com Servers.
• Define an SNTP Server address and refresh period
• Proxy host and port
• SIP parameters (read only)
• In Security menu:
• 802.1x parameters
• Certificates: not used
4.4.2.1.2.4 Configuring the user name and password in OMC
The user default password for a new user is defined at first installation. If need be, the administrator
can reset the user default password via the OMC
To modify the name and reset the password:
• In OMC, go to Users/Base stations List.
• To modify the user name: click the user in the list, modify the user name in the corresponding field
and click Modify
• To reset the user password:
• Click the user in the list and click Details to open the User window
• Click Password to open the Password window
• Click Reset to reset the password
Chapter
4
Installation and Cabling
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 80/207
To Next Page
Loading...
Need help?
General
