Management from the attendant set
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set 3-35
3-2-2-8 Installation status
By pressing the top of the « » key, then on the key below the «NBSets» label, the following
is displayed:
The first line displays:
xxxxxx number of sets declared in the installation.
yyyyyy number of sets declared with DOD.
Pressing the «Back» key is used to return to the main menu.
3-2-2-9 Defective external line
When an external line presents an anomaly detected by the system, it can be isolated from the
attendant set so that it will no longer be selected in an o/g call until it is repaired.
By pressing the top of the « » key, then on the key below the «TrkO/S» label, the following
is displayed:
The attendant enters the value of the defective trunk in the form of 2 digits. The value is taken in
account when «Programming accepted» is displayed. After repair, the correct operation of
the trunk is tested by the system and, if this is successful, the trunk is removed from the list of
defective trunks.
3-2-2-10 Date - Time
Pressing the «Date» key displays the following:
To Next Page
Loading...
