Alcatel 4035 - Page 48

Chapter 2 Attendant set facilities
2-26 3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set
Pressing the «OnHold» key advances the communication:
- either by a call to an internal user,
- or by another call to the exterior.
By pressing the «OnHold» key, the correspondent is put on hold.
From this position, the attendant can activate an enquiry call to another set or release the
communication in progress by pressing the «Releas» key.
Note: In the case of an ISDN call, the following is displayed:
If the call number is not to be sent, the «call number» field is replaced by «Numeris». The rest of the
call operation is the same as described above.
2-1-5 Routing an external I/C call to a free set
The attendant answers the call and enters into conversation with the correspondent.
The following is displayed:
The attendant selects the internal user by:
- its repertory number,
- the individual repertory,
- call by name,
- a key programmed in individual call.
The first correspondent remains in conversation with the attendant.
call reference
Releas
call number
OnHold
Trace
Trace
Status
ReleasOnHold
Bundle