C 90
2 / 6
Alcatel Vacuum Technology France --- IPUP A100 Instruction manual
Use of the serial link
CONTROLLING THE UNIT
PUMPING USING THE SERIAL
LINK
The controls are used to manage information relative to the working
pump. The pumping remote controls are however managed as a
priority.
INSTRUCTION SYNTAX
The control
# O R D P A RA D D
ADDress of unit, varies from 000 to 999
ORDer sent Associated PARameter
<CR>
# A D D
<CR>
(see list) (see list)
Heading character Message and character
(ASCII code 13)
The character <LF> is not taken
account by the unit
The response
Example of dialog :
E : q000SYSON<CR>
R : q000OK..<CR>
To Next Page
Loading...
