13
Getting started
Recharge your telephone battery regularly. The telephone can be on or off when
recharging the battery. If the telephone is to remain unused or out of its charger for
several weeks, remove the battery and store it separately.
* battery charged after 3h or 5h depending on the model.
If the display does not come on or if the battery charge level icon flashes, recharge the
battery.
If the radio coverage icon does not appear on the telephone display:
Check that you are in an area of radio coverage (if not, move closer to a base station).
Check that your telephone is correctly installed on the system (contact the PBX
manager for this).
Switching off your telephone:
Press the key (long press).
2 2. Charging your telephone battery
Connect the charger and
place the telephone in
the charging holder
Battery being charged*
The green light is on and
the battery icon is
displayed
2 3. Switching on your telephone
Switch on
(long press)
Wait a moment
(about 3 seconds)
Your telephone
is switched on
If the display indicates: "System 1 - Auto install ?", see paragraph "Registering
the telephone" or contact your installation technician.
To Next Page
Loading...
Need help?
General
