Alcatel OmniPCX 4400 User Manual

Coverage zone:
The DECT functions provided by your Alcatel OmniPCX 4400 system allow
user mobility management via DECT cordless telephones.
The radio coverage of the ALCATEL system is ensured by a network of base stations.
The zone covered by a base station is called a cell.
 Mobility:
A user can make or receive calls in any cell.
 Radio transfer:
This function enables the user to move during a conversation and go from one cell to
another. The transfer takes place automatically and has no effect on the conversation.
In some cases, slight crackling may be audible at the moment of transition.
Using an approved DECT standard telephone:
This approved DECT telephone is intended to be used with an Alcatel cordless
PBX.
The CE marking indicates that this product complies with the European
Community directives in effect, and the following directives in particular:
- 89/336/CEE (electromagnetic compatibility)
- 73/23/CEE (low voltage)
- 1999/5/CE (R&TTE)
Pursuant to directive 1999/5/CE (R&TTE) published in the Official Journal of the European
Community of April 7, 1999, these items of equipment use the DECT harmonized
frequency spectrum and can be used in all the countries of the European Community, in
Switzerland and Norway.
No guarantee is given concerning possible interference affecting DECT equipment, due to other
authorised utilisation of the radio frequencies concerned.
5
Precautions for use

Alcatel OmniPCX 4400 Specifications

General

Brand	Alcatel
Model	OmniPCX 4400
Category	Telephone System
Language	English