Setting Up: Chapter 1
QS6 Reference Manual 9
• Although Alesis does not endorse any specific product, chemicals such as Tweek
and Cramolin, when applied to electrical connectors, are claimed to improve the
electrical contact between connectors.
BASIC AUDIO HOOKUP
J
When connecting audio cables and/or turning power on and off, make sure that all
devices in your system are turned off and the volume controls are turned down.
Because the QS6 includes extensive signal processing as well as a full complement
of sounds, you can make great sounds with nothing more than an amplifier or a set of
headphones.
The QS6 has two Main outputs, plus a stereo headphones output. These can provide
an amplification system or mixer with two different audio hookup options:
• Mono. Connect a mono cord from the [RIGHT] OUTPUT jack to a mono
amplification system or individual mixer input.
• Stereo. Connect two mono cords from the [LEFT] and [RIGHT] OUTPUT jacks to
a stereo amplification system or two mixer inputs.
• Stereo Headphones. Plug a set of high-quality stereo headphones into the
headphones [ ] jack on the rear panel.
To Next Page
Loading...
