Chapter 2: Your First Session With The QS6
16 QS6 Reference Manual
AUDITIONING MIX PLAY MODE
Mix Play Mode allows you to assign a Program to each of the 16 MIDI channels. This
makes it easy to create multitimbral setups for use with an external MIDI sequencer.
Additionally, a MIX can be used to “layer” sounds together, or “split” the keyboard in a
number of ways, or any combination of these. There are many different ways to
program a Mix. For more about Mix Play Mode, refer to Chapter 5. For more about
connecting the QS6 to a MIDI sequencer, see Chapter 3.
¿ Press the [MIX] button.
The display will change to Mix Play Mode.
¡ Select a Mix from 00–99 using one of these methods:
• Use the Group buttons ([00/PIANO], [10/CHROMATIC], [20/ORGAN], etc.) to
select a Mix Group, then use the [0] – [9] buttons to select a Mix within the
Group.
• Use the [s VALUE] and [VALUE t] buttons to step forwards and backwards
through all the Mixes one at a time.
J
When in Mix Play Mode, the
[100/SYNTH 3],
[110/RHYTHM/FX]
and
[120/DRUMS/PERC]
buttons will not function, Mixes only go from 00 to 99.
SELECTING MIX BANKS
The QS6 provides five internal Banks containing 100 Mixes in each. The currently
selected Bank will be shown in the display just to the left of the currently selected
Mix’s name.
Current Bank
Ø
MIX PRESET1 ºº
Piano&Pad ‹
• Use the [
▲
BANK] and [BANK
▲
] buttons to select a Bank (User, Preset 1 – 3,
GenMIDI).
User and Preset Banks are described in detail in Chapter 4.
To Next Page
Loading...
