- 25 -
MTU Size - The default MTU size is “1480” bytes. It is not recommended that you change the
default MTU Size unless required by your ISP.
Attain DNS Automatically – Receives DNS address automatically from the ISP.
Set DNS Manually - If your ISP gives you one or two DNS address, select Set DNS
Manually and enter the primary and secondary addresses into the correct fields. Otherwise,
the DNS servers will be assigned dynamically from your ISP.
Note:
If you find an error on the website after entering the DNS addresses, it is likely that your DNS
server has been set up improperly. You should contact your ISP to get DNS server
addresses.
Click the Apply Changes button to save your settings.
4. If your ISP provides PPTP connection, please select PPTP option and enter the following
parameters (Figure 4-11):
Figure 4-11 L2TP Settings
To Next Page
Loading...
