- 24 -
Figure 4-9 WAN - PPPoE
User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Service Name - The service name should not be configured unless you are sure it is
necessary for your ISP. In most cases, leaving these fields blank.
Connection Type
Continuous –
C
on
t
i
nuou
s
c
onn
e
c
t
i
on
type means to setup the
c
onn
e
c
t
i
on
through
PPP
o
E
pro
t
o
c
o
l
whenever
t
h
i
s
W
L
A
N
B
ro
a
db
a
nd
R
ou
t
e
r
i
s powered
on
.
Connect on Demand – In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-established
when you attempt to access the Internet again.
Manual - You can click the Connect/Disconnect button to connect/disconnect
immediately. This mode also supports the Max Idle Time function as Connect on
Demand mode. The Internet connection can be disconnected automatically after a
specified inactivity period and re-established when you attempt to access the Internet
again.
Caution: Sometimes the connection cannot be terminated although you specify a time
to Max Idle Time because some applications are visiting the Internet continually in the
background.
Idle Time - If you want your Internet connection to be active constantly, please enter “0” in the
Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
To Next Page
Loading...
