8028 SIP Doorphone (G2) FW 3.2
9. Verify the extension is properly registered with the SIP server in the Status tab. Ensure
the SIP Registration is “Successful”.
10. Press the Call Button on the Door Station, then answer the phone to communicate over
the Door station. Press the digit 6 (default value) on the phone keypad to activate the
door control relay for three seconds (if applicable).
Document 90-00104
05/21/2020
Page 11
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
