8028 SIP Doorphone (G2) FW 3.2
Basic Settings Tab – Door Control
Momentary Open Code
1-4 digit DTMF code that can be used to unlock the door for a brief period of time. Leave
this field blank to disable this feature.
(Default: 6)
Duration
The time period for which to unlock the door when the Momentary Open Code is entered.
From ¼ to 30 seconds.
Cancel if Door Opened
Cancels the door unlock (i.e. locks the door again) if the door has been opened to ensure
it cannot be opened a 2nd time. This option is available only when a physical sensor is
installed (not included) on the door and either "Controller Input" or "Door Station Input" is
set to "Door Sensor" in Basic Settings > Input/Output tab.
Document 90-00104
05/21/2020
Page 27
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
