8028 SIP Doorphone (G2) FW 3.2
silence at the end in order to generate ring "cadence" of 6 seconds. This silence will block
the voice path for several seconds at the start of a call.
Outbound Ring Limit
This feature can be used to set a limit on how long the intercom will ring before timing out.
If the call is not answered within this time period, the 8028 will go back to an idle state.
Ringback Tone
Select an audible ringback tone to be played on the 8028 speaker until the call is
answered.
Allow Call Button to End Active Call
If enabled, allows the visitor to end an active call by pressing the call button.
Cancel if Door Opened
If enabled, cancels an outbound call only if it is still ringing.
G.722 Support
Enable or disable the G.722 codec.
Maximum Call Duration
Select the maximum call length. The call will be terminated once the maximum time is
reached. In the event that a call inadvertently reaches voicemail or gets accidentally left
on hold, this setting ensures that the 8028 returns on-hook.
Document 90-00104
05/21/2020
Page 26
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
