8028 SIP Doorphone (G2) FW 3.2
Advanced Settings Tab – Advanced Multicast
Note: The settings on this tab are only available when in multicast slave mode
Audio Sync
When paging to the 8028 SIP Doorphone as well as other third party devices, the low
latency of the 8028 may cause the audio to lead other devices. By adding audio delay up
to one second, the 8028 may be synchronized with other endpoints or telephones that
have greater latency.
Document 90-00104
05/21/2020
Page 47
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
