8028 SIP Doorphone (G2) FW 3.2
Advanced Settings Tab – Admin
Password
Password to log into the 8028 SIP Doorphone web interface. You should change the
default password algo in order to secure the device on the network. If you have forgotten
your password, you will need to perform a reset using the Reset Button in order to restore
the password (as well as all other settings) back to the original factory default conditions.
For additional password security see “Force Strong Password” below.
Confirmation
Re-enter network admin password.
Document 90-00104
05/21/2020
Page 36
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
