8028 SIP Doorphone (G2) FW 3.2
Device Name (Hostname)
Name to identify the device in the Algo Network Device Locator Tool.
Introduction Section on Status Page
Allows the introduction text to be hidden from the login screen.
Show Status Section on Status Page when Logged Out
Use this option if you wish to block access to the status page when logged out. The
settings and configurations, on the status page, will be hidden entirely unless you’re
logged in – this feature is useful when you want only trusted users to view possible
sensitive device information.
Display Switch Port ID on Status Page
Switch port ID can be displayed on the status page, however the switch must support
LLDP or CDP.
Web Interface Session Timeout
Set the maximum period of inactivity after which the web interface will log out
automatically.
Log Level
Use on the advice of Algo technical support only.
Log Method
Allows the 8028 to write to external Syslog server if the option for external (or both) is
selected.
Log Server
If “Network” or “Both” is selected this is the address of the Syslog server on the network.
Web Interface Protocol
HTTPS is always enabled on the device. Use HTTPS only to disable HTTP, then requests
will be automatically redirected to HTTPS. Also note that since the device can have any
address on the local network, no security certificate exists, and thus most browsers will
provide a warning when using HTTPS.
Force Strong Password
When enabled, ensures that a secure password is provided for the device’s web interface
for additional protection. The password requirements are:
• Must contain at least 10 characters
• Must contain at least 1 uppercase character
• Must contain at least 1 digit (0 – 9)
• Must contain at least 1 special character
Document 90-00104
05/21/2020
Page 37
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
