8028 SIP Doorphone (G2) FW 3.2
Allow Secure SIP Password
Allows SIP passwords to be stored in the configuration file in an encrypted format, to
prevent viewing and recovery. Once enabled, the SIP “Realm” field should be entered and
all the configured Authentication Password(s) must be re-entered in the Basic Settings >
SIP tab, to save the encrypted password(s).
If the Realm is changed at a later time, all the passwords will also need to be re-entered
again to save the passwords with the new encryption.
To obtain your SIP Realm information, contact your SIP Server administrator (or check the
SIP log file for a registration attempt).
SNMP Support
The 8028 SIP Doorphone will respond to a simple status query for automated supervision.
SNMPv3 security may be enabled. Contact Algo technical support for more information.
RESTful API
Secure API for remote access & control via HTTP. Contact Algo Support for more
information.
System Integrity Checking
This feature verifies installed system packages to ensure they have not been tampered
with by running ‘Perform Check’. Enabling this feature may cause reboots and upgrades
to take 30 seconds longer. Verification results can be found on the Status page.
Document 90-00104
05/21/2020
Page 38
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
Loading...
