Alienware 13 - Removing the Power-Button Board; Prerequisites; Procedure

Removing the power-button board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the
instructions in
After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel.
2 Follow the procedure from step 1 to step 5 in “Removing the solid-state drive”.
3 Follow the procedure from step 1 to step 8 in “Removing the palm rest”.
4 Follow the procedure from step 1 to step 4 in “Removing the keyboard”.
Procedure
1 Lift the connector latch and disconnect the power-button board cable from the power-button board.
1 connector latch 2 power-button board cable
33