Alienware 13 - Removing the Wireless Card; Prerequisites; Procedure

Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the
instructions in
After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel.
2 Follow the procedure from step 1 to step 5 in “Removing the solid-state drive”.
3 Follow the procedure from step 1 to step 8 in “Removing the palm rest”.
4 Remove the display assembly.
5 Follow the procedure from step 1 to step 5 in “Removing the power-adapter port”.
Procedure
Slide the wireless card from the wireless-card slot on the system board.
1 wireless card 2 wireless-card slot
50