46 | Operating the monitor
Input Source Use the Input Source menu to select between the different
video signals that may be connected to your monitor.
DP Select the DP input when you are using the DisplayPort (DP)
connector. Press the OK button to confirm the selection.
HDMI 1 Select the HD
MI 1, HDMI 2, or HDMI 3 input when you are
using the HDMI connectors. Press the OK button to confirm
the selection.
HDMI 2
HDMI 3
Auto Select Turn on the function to allow the monitor to automatically scan
f
or available input sources.
Reset Input
Sour
ce
Resets all settings under the Input Source menu to the factory
defaults.
AlienFX
Lighting
Use this menu to adjust the LED light settings for the Power
button, Alienware logo, and the light stripe on the I/O cover.
To Next Page
Loading...
