EasyManua.ls Logo

Alinco DJ-A10 - Time-Out-Timer (TOT); Voice Operated Transmission (VOX)

Alinco DJ-A10
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Professional
FM Transceiver
46
Time-Out-Timer(TOT)
This function stops the transmission automatically when the continuous
transmission time exceeds the set time and alerts it with a beep.
1.Press and hold
PF2
key while turning on the radio, and keep pressing
PF2
key for 3 seconds to enter into the Set Mode operations.
2.Press
B
/
C
key to choose the Menu 2 and display “
TOT
”.
3.Press
A
key then press
B
key or
C
key to choose the parameter, that
is from 15 to 240 seconds (4 minutes) in 15 seconds step.
OFF:
TOT is OFF and default is 180s.
SET MODE OPERATIONS
Voice Operated Transmission (VOX)
After enabling this function, you can directly start transmitting by voice instead of pressing
[PTT]
key.
1.Press and hold
PF2
key while turning on the radio, and keep pressing
PF2
key for 3 seconds to enter into the Set Mode operations.
2.Press
B
/
C
key to choose the Menu 3 and display “
VOX
”.
3.Press
A
key then press
B
key or
C
key to choose the parameter
Available parameters are 3 levels of VOX sensitivity in 1, 2 or 3. 1 is most
sensitive, 3 is less sensitive that requires more voice level to activate VOX.
OFF:
VOX transmitting is disabled. Default is OFF.
NOTE:
1.VOX is not usable in noisy areas as it may start transmitting by the back noise.
2.An optional headset is necessary to use VOX function.

Table of Contents