Alinx ARTIX-7 - Page 8

ARTIX-7 FPGA Development Board AX7101 User Manual
8 / 51
www.alinx.com
 4-channel high-speed SFP Interface
The four high-speed transceivers of the GTP transceiver of ARTIX-7
FPGA are connected to the transmission and reception of four optical
modules to realize four high-speed optical fiber communication
interfaces. Each fiber optic data communication receives and transmits
at speeds up to 6.6 Gb/s.
 1-channel VGA Output interface
16-bit color VGA analog output, RGB565 format, can generate 32
gradient grade red and blue signals and 64 gradient grade green
signals
 1-channel Uart to USB interface
1 Uart to USB interface for communication with the computer for user
debugging. The serial port chip is the USB-UAR chip of Silicon Labs
CP2102GM, and the USB interface is the MINI USB interface.
 40-pin expansion port
40-pin 0.1inch spacing expansion port can be connected to various
ALINX modules (binocular camera, TFT LCD screen, high-speed AD
module, etc.). The expansion port contains 1 channel 5V power supply,
2 channel 3.3V power supply, 3 way ground, 34 IOs port.
 JTAG Interface
A 10-pin 0.1 spacing standard JTAG ports for FPGA program download
and debugging.
 Key
2 Keys; 1 reset Key (on the core board)
 LED Light
3 user LEDs (1 on the core board and 2 on the Carrier Board)