FX Model - Stereo Delay
Stereo Delay includes two tap delays (left and right) where the speed of repeats
can be set independently for each.
Width – Adjust from centre (both delays are heard in the centre) to full width (left
is only heard in the left output and right is only heard in the right output).
Width has no effect if Stereo Delay is inserted into a mono channel.
Left/Right – Tap multiple times on the ms value box to set delay time or select
and adjust with the touchscreen rotary (CQ-12T, CQ-18T) or touch and drag (CQ-
MixPad).
Link – Link the Left and Right delay times.
Low/High Cut – Cut Low or High frequencies from the sound being repeated.
Ping Pong – Turn On to have the repeats alternate Left/Right.
Feedback – Adjust the level of the repeats feeding back into the delay.
To Next Page
Loading...
