CONTROL & NETWORK / Network (WiFi) (CQ-18T, CQ_20B)
Enabled Network – Select Ethernet for wired connection through the Network
port. Select Wi-Fi Access Point for wireless connection using the integrated
access point of the unit (CQ-18T, CQ-20B).
Security – Select between an open access point or a WPA2 password protected
network.
Password – When WPA2 is selected, set a password here. The default password is
‘DefaultPassword’
Frequency – Choose between use of 2.4GHz or 5GHz frequency bands.
Channel – Select a channel (it is recommended to leave Auto set).
SSID Visibility – Choose whether the network name is broadcast openly.
SSID Name – Assign a custom name for the network. The default name is the CQ
model followed by the last 4 digits of the serial number.
To Next Page
Loading...
