ALLEN & HEATH CQ Series - Output and Footswitch Ports

 14
User Guide V1.1.0 Issue 1
2. Outputs
Main LR
Balanced XLR (1-Ground, 2-Hot/Positive, 3-Cold/Negative)
Nominal +4dBu output (when output meter displays 0dB)
Out 1-6 (CQ-12T, CQ-18T)
Balanced ¼” TRS Jack (Tip-Hot/Positive, Ring-Cold/Negative,
Sleeve-Ground)
Nominal +4dBu output (when output meter displays 0dB)
Out 1-6 (CQ-20B)
Balanced XLR (Pin1-Ground, Pin2-Hot/Positive, Pin3-
Cold/Negative)
Nominal +4dBu output (when output meter displays 0dB)
Headphone/s
Stereo ¼” TRS Jack (Tip-Left, Ring-Right, Sleeve-Ground)
Recallable digital trim control.
3. Footswitch
Mono (TS) or Dual (TRS) ¼” Jack
Can be calibrated for use with momentary or latching switches.