Digital Audio (Symbols) / Bluetooth
On/Off – Turn Bluetooth on or off.
Discoverable – Allow the CQ unit to be seen by other Bluetooth devices. Activate
this then add the CQ as a Bluetooth device to a phone, tablet, or computer.
Forget Device – Select a previously connected device from the list, then use this
to prevent it from connecting in future.
Devices can always be connected again using the Discoverable button.
Disconnect – Terminate connection with the selected device.
The CQ-12T requires that a PIN is used for connection. This is set as 1969 (the year
Allen & Heath was founded).
To Next Page
Loading...
