Differences
1. Main screen keys:
Physical keys on hardware Vs Main tabs at the top of CQ-MixPad
2. Soft Keys:
Physical keys on hardware Vs buttons on CQ-MixPad
3. Location of channel bank tabs:
At the top of a CQ touchscreen Vs At the bottom left of CQ-MixPad
4. Keyboard text entry:
On-screen with hardware Vs Default method for the remote device
Some additions with CQ-MixPad are:
5. Faders are available at the bottom of Processing and FX screens.
6. Other than in the Processing screen, output selection and output level
fader are always available on the right-hand side.
Control and fine adjustment of faders in CQ-MixPad
Touch or click and drag to move faders up or down.
Keep the fader selected (keep finger on screen or click and hold) and move left or
right away from the fader to make finer adjustments when moving up or down. The
further from the fader, the finer the control.
To Next Page
Loading...
Need help?
General
