28 Rockwell Automation Publication 1791ES-UM001G-EN-P - November 2016
Chapter 2 About the Modules
Firmware Information and
Downloads
Verify that the Guard I/O firmware revision is correct before you commission
the safety system. Firmware information and downloads for safety modules are
available at this link:
http://www.rockwellautomation.com/rockwellautomation/support/
pcdc.page.
Functional Safety
Certificates
Safety certificates for Functional Safety modules are available at this link:
http://www.rockwellautomation.com/global/certification/overview.page
Understand Suitability for
Use
Rockwell Automation is not responsible for conformity with any standards,
codes, or regulations that apply to the combination of products in your
application or use of the product.
Take all necessary steps to determine the suitability of the product for the
systems, machine, and equipment with which it is used.
Know and observe all prohibitions of use applicable to this product.
Never use the products for an application that involves serious risk to life or
property without making sure of the following:
• The system as a whole is designed to address the risks.
• The Rockwell Automation product is properly rated and installed for
the intended use within the overall equipment or system.
Use the module only in an environment that is within the general specifications
of the module.
To Next Page
Loading...
